With a 20,000 gauss field, the TS-1XT NSA-EPL listed degausser completely erases all data on hard drives and tapes in under 15 seconds. The TS-1XT comes with a SCAN-1X scanner and software package voucher to create an audit-worthy media destruction report as you degauss.
Generates 20,000+ gauss (2 tesla) magnetic field for complete erasure of hard drives and tape
Complete data elimination in 15 seconds
LCD numerically displays the gauss level after each cycle
Erases up to 1,295 (1.8 in.), 865 (2.5 in.), and 150 (3.5 in.) drives per hour
SCAN-1X hard drive and tape destruction report software and scanner voucher included
Upgradeable to IRONCLAD Erasure and Destruction Verification System
Erases working and non-working hard drives
Continuous duty - no cool down between cycles
Certified to UL, IEC, CSA and CE standards
Combine the TS-1XT degausser with Garner’s exclusive IRONCLAD® Erasure Verification with JPG Image Capture System for complete, permanent, and verifiable data elimination. Only Garner provides the best audit trail and proof-of-erasure reports with JPG images of degaussed hard drives and a record of gauss field strength for each cycle.
Permanent Erasure of Top-Secret Data
Uniformly distributed 20,000-gauss power magnetically erases high-coercivity hard drives and tapes, ensuring Top-Secret classified data can never be recovered. The TS-1XT is the ultimate solution for the permanent erasure of all magnetic data.
Best Practices: Degauss Before you Destroy
Physical destruction of hard drives alone leaves data behind (i.e. shredding, crushing, piercing, bending)
The NSA-listed TS-1XT Degausser eliminates all data on the disc platters
After degaussing, physical destruction from the PD-5 gives visual confirmation that the hard drive has been securely processed and is ready to leave the controlled environment for disposal or shredding
Note: Solid-state media cannot be degaussed. Physical destruction of the media with the Garner SSD-1 solid-state destroyer is recommended before the media leaves its secure environment.
Degauss vs. Overwrite
Overwriting is a method where a random pattern of usually "1" and "0" is written to every part of the drive, frequently three times, to obliterate the underlying data. The advantage of this method is the drive can be re-used. The disadvantages are: it takes a skilled operator to ensure the overwriting is done correctly; non-functioning sectors of the hard drive cannot be overwritten allowing data to remain on the drive; it takes a considerable amount of time-hours, and therefore electricity; and it is not regarded as failsafe, or permissible for the highest data security standards such as the NSA, CIA, or DoD.
Degaussing is the process of exposing the media to a strong magnetic field of sufficient strength to magnetically destroy the data. The advantages of degaussing are: a skilled operator is not required to operate a degausser; the magnetic field destroys all data on the drive in approximately 1/10 of a second regardless of whether the drive is functioning or non-functioning. Degaussing is recognized by the NSA and DoD as an appropriate method of secure data destruction. The disadvantage of degaussing is the hard drive cannot be re-used.
After degaussing, the data on a degaussed hard drive simply no longer exists.
HIPAA (Health Information Portability and Accountability Act)
NIST SP 800-88r1
PCI DSS 3.2 (Payment Card Industry Data Security Standard)
PIPEDA (Personal Information Protection and Electronic Documents Act)
NSA/CSS Listed. Laboratory Tested.
Tested by the National Security Agency (NSA) to their exacting standards, the powerful and compact TS-1XT ensures complete data erasure and prevents data recovery from forensic and laboratory attacks. "NSA Listed" reflects the confidence the United States Government has in the ability of the TS-1XT to erase Top-Secret data.
Domestic and International Safety Standards
Garner Products, Inc., leads the data destruction industry in product safety by being the first and only U.S. hard drive degausser and destroyer manufacturer to earn certification of our products to UL, IEC, and CSA safety standards from a Nationally Recognized Testing Laboratory (NRTL).
Our products are also independently tested for conformity to CE standards for safety and emissions for the European Union.
These U.S. and international certifications identify Garner’s products as safe to operate in data centers, hospitals, offices, and other sensitive environments around the world. Garner’s products are certified to:
We are proud to be an ecofriendly manufacturer in California, the state that sets the standard for environmental protection. At every stage of the manufacturing process, from product design through manufacturing and shipping, we apply processes and use materials that minimize environmental impact.
TS-1XT Security That Fits— Optional Packages and Accessories
Whether you want to use the TS-1XT in an office, mount it on a rack, take it on the road, or do all three, we offer the options that make the TS-1XT the perfect fit. Create the ultimate in Top Secret data destruction by adding our NSA EPL-listed PD-5 Hard Drive Destroyer that destroys magnetic, solid-state, solid-state hybrid, flash, and thumb drives.